In-Duct Air Vent Mounted Dual Double Tube Bulbs Dual YupGuard357 Plus

In-Duct Air Vent Mounted Dual Double Tube Bulbs Dual YupGuard357 Plus

UVC Ac Air Duct UV Lights UV Air cleaner Dual Yupguard 357

The YupGuard UV Cleanser also incorporates dual safety devices and has earned the UL Underwriters Laboratories Safety Listing. Every YupGuard UV Cleanser operates on 110volts of power.

12″ 16″ or 24″ bulb lengths, 16″Bulb Standard. 24-30 month bulb optional. Single or Twin Bulb configurations.

Dimensions: 7.5″L x 4.5″W x 3″H
Weight: Less than 2 lbs.
Power: 120/277 volt standard
Current: 0.47 amps @ 240v
UV Output: 550 to 1460 Microwatts* depending on model.
Ozone Generation: None. Ozone generating bulbs available.
Average Bulb Life: 9,000 Hours Continuous. 8,000 24-30 month bulbs available.
  • Description
  • ORDER IT HERE
In-Duct Air Vent Mounted Dual Double Tube Bulbs Dual YupGuard357 Plus

Includes 2 UVC bulb 357mm or 406mm as requirement

 

Description: 1, CE certificate, product quality certificate
2,Voltage: 110-120V/220-240V
3.Super Quality Metal Shell box
4.The bulb can be with ozone or non-ozone, it depend on customer request

Replacement bulbs available 2 pcs of 357mm bulbs for 406mm bulbs

120 volt, with power cord. OR 220V ,PLS CHOOSE

Size (unit without bulb):

Weight: 2.86 lbs

UV-C light inhibits the growth and reproduction of germs and bacteria that circulate through a home’s heating and air conditioning system. The treatment is a safe, silent, and proven way to make your home a healthier place to live.

 

 

The UV-PURE unit is designed to emit powerful UVC band light rays which sterilize and reduce airborne  microorganisms as they pass through a heating or air conditioning system. It is installed in the main supply or return duct and operates continuously to automatically purify the air in the home 24 hours a day.

 

 

This product is not sold as a medical device and is not for the purpose of diagnosis of any disease or condition nor for use in the mitigation, treatment, or prevention of any disease or condition.

 

 

READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE PROCEEDING WITH THE INSTALLATION.

 

 

This device MUST be installed by a qualified agency in accordance with the manufacturer’s installation instructions. The definition of a qualified agency is: any individual, firm, corporation or company which either in person or through a representative is engaged in, and is responsible for, the installation and operation of HVAC appliances, who is experienced in such work, familiar with all the precautions required, and has complied with all the requirements of the authority having jurisdiction.

 

 

SAFETY CONSIDERATIONS

 

 

WARNING: Before installing or servicing a humidifier, air filter, heat system, or this unit, etc., always turn

all power OFF and have units unplugged. Electrical shock can cause personal injury or death. Never

expose eyes or skin to direct UV-C light from any source.

WARNING: To prevent water damage or electric shock, do not mount unit under a humidifier.

WARNING: Designed for a closed duct system. Do not mount near a return air opening.

WARNING: This product is designed for indoor installation only (i.e. attics, crawl spaces, basements,

etc.). For use on gas fired, oil fired, electric and split system heat pump forced air systems*. This product

is NOT designed to be mounted outside on gas fired or heat pump packaged units**.

WARNING: Never expose eyes or skin to UVC light from any source.

• Looking directly at the UVC light may cause permanent eye damage or blindness.

• Never operate the UV-PURE Air Purifying System out of the plenum.

• Designed for a closed duct system. Do not mount near a supply or a return air opening.

• All duct openings in direct line of site of the UV light must be sealed with aluminum tape or equivalent sealing methods.

WARNING: UV light will break down plastic materials not rated for UV exposure:

(Examples: wire insulation, flex duct, drain pans and humidifiers)

• The unit must be mounted at least 30″ from the above stated type of materials.

• I f it is necessary to mount the unit in direct line of sight of these types of materials, they must be shielded with aluminum foil, aluminum foil tape, or sheet metal.

WARNING: DO NOT mount this unit outdoors.

• This product is designed for indoor installation only (i.e. attics, crawl spaces, basements, etc.).

 

WARNING: Never touch broken lamp or internal contents of lamp. The lamp contains mercury.

• After opening the carton, unpack and inspect the unit and lamp for damage. Do not install

this unit if any damage is noticeable. If lamp is damaged, cracked or broken, do not touch

lamp or other contents in carton. Close carton and return to seller immediately.

• In case of accidental exposure to internal contents of lamp, wash hands and any other

affected skin area with mild detergent. Remove affected clothing immediately. If skin surface

is pierced, seek medical attention immediately.

NOTE: If you touch the glass of the lamp, you should wipe the glass clean with isopropyl alcohol

and a lint free wipe. If the lamp is not cleaned, the film of hand oils causes a reduction in the

light intensity.

WARNING: Before installing or servicing a humidifier, air filter, HVAC system, or this unit, etc.,

always turn all power OFF and have unit unplugged. Electrical shock can cause personal injury or

death. Never expose eyes or skin to direct UVC light from any source.

WARNING: To prevent water damage or electric shock, do not mount unit under a humidifier.

WARNING: This product is designed for indoor installation only (i.e. attics, crawl spaces, basements,

etc.). For use on gas fired, oil fired, electric and split system heat pump forced air systems*. This

product is NOT designed to be mounted outside on gas fired or heat pump packaged units**.

 

 

WARNING: Never expose eyes or skin to UVC light from any source. Looking directly at the UVC light may cause permanent eye damage or blindness.

Never operate the UV-PURE Air Purifying System out of the plenum.

Avoid touching the glass portion of the lamp with your hands

 

 

GENERAL INFORMATION

The UV-PURE unit uses technology that is recommended by doctors who state that “ultraviolet radiation,properly integrated with heating, ventilating, and air conditioning systems, shows the most promise as a widely applicable means of air disinfection”.

 

 

 

 

INSTALLATION

1. Locate a suitable location for the unit

downstream from the ‘A’ coil in the supply

plenum or in the return plenum; preferably

downstream from the air filter. For optimum

“cleaning” effect on the ‘A’ coil, mount the

unit in the supply plenum as close as possible

to the ‘A’ coil. (See Figure 1)

IF YOU HAVE FLEX DUCT
For installations on duct systems with a metallic main duct and flex duct branches, follow the instructions in figure below

 

 

EASY INSTALLATION STEP:

1.    Measure the decide where and measure the hole of the wall to check the size if it is

suitable To install the unit.

2.    Insert the uv bulb into the socket .see the Figure.

3.    Mount the unit base to the duct using the four mounting screws provided. See Figure

4.    Replace cover on unit.Tighten top side screws and down side screws.

5.    Flip switch on box to the ON position.( Light on switch should be on)

6.    Look through view port in the box cover on the left to be sure the lamp is working.

You can see a blue light. (we have a lens in the hole and blocks the UVC rays)

 

 

Only 3 minitues installation or even shorter, Extremely easy installation,no need experts at all,

Just do it by yourself! Only 3 steps:

1. Make hole in house where you want to install the uv purifier

2. Insert the UV Bulb.

3. Screw it!

So easy ! Everybody can do it! you are UV expert also!!

For sample order,pls click below

For big quantity please email  to  info@firstuv.com